Stanford DM16 Shrink Sleeve Inspector

Don’t throw out bad rolls - Doctor them!

The DM16 has many advanced features to simply this process. A manual inspection button allows the operator to return the detected defect to the splice table automatically, while automatic inspection for UV, seam integrity, and flags will return the defective location to the splice table.

Designed specifically for shrink sleeve applications, the DM16 compliments Stanford’s Seamer line. To save valuable floor space, we designed the most compact vertical seam inspection machine on the market. The DM16 requires only two square feet for installation. The DM16 is fully-cantilevered with a intuitive touchscreen, and is designed for fast production with speeds up to 500 mpm (1,640 fpm).

  • Manual inspection button with return-to-defect
  • Intuitive touchscreen controls with unlimited recipes
  • Electronic rewind oscillation up to 20 mm [0.75”]
  • Cantilevered compact design
  • Reversible over/under winding
  • Automatic inspections for seam integrity, solvent presence and splice/flag detection.
  • Dual motor smart AC Vector drive system
  • Onboard drive-based PAC Control
  • Internet-based remote diagnostics with WiFi capability
  • Minimum Layflat Width: 50 mm [2”]
  • Maximum Layflat Width: 406 mm [16”]
  • Maximum Web Speed*: 500 mpm [1,640 fpm]
  • Maximum Unwind Diameter: 610 mm [24”]
  • Maximum Rewind Diameter: 610 mm [24”]
  • Tension:0.26 kg/cm [1.5 PLI]
  • Total Minimum Tension:1.58 kgf [3.5 lbf]
  • Shaft Options:76.2 mm,127 mm,152 mm [3”, 5”, 6”]
  • Machine Options: UV Detection, Bubble Detection, Flag Detection, Splice Detection, Strobe Light

* Max speed is a function of the material characteristics (including COF, coatings, ink adhesion, curing, and drying), gauge bands, tension and web width

 

Contact Us For More Information